V81
V82
V83
V86
VH86
VT86
V87
V23
V81
V82
V83
V86
VH86
VT86
V87
V23
Stainless Steel and Brass
1/8 to 1 in. Hoses
Male Adapter, Female Adapter
Tube Adapter
DK-Lok Tube Fitting Adapter
Hose Sleeve
DK-Lok Hose Adapter Fittings are designed for use with soft plastic or rubber tubing.
Standard hose barb design is for use with hose sleeve or hose clamp.
DK-Lok hose adapter fittings are reusable
Stainless steel and brass construction.
Working Pressure : 3,000 psig
Stainless Steel and Brass
2-way and 3-way actuation
DK-Lok 1/16 to 3/4 in. OD
Pipe thread 1/8 to 1/2 in.
V82 series Ball valves are classfied into 3 types according to the temperature range in use. V82 series is for general use and VL82 is adequate to the low temperature range. VG82 can be used in the widen temperature range from low to high temperature. The exact temperature range of each type is referred to the technical data of the type.
Working Pressure : 3,000 psig
Stainless Steel and Carbon Steel
DK-Lok 1/4 to 1 in. OD
Pipe thread 1/8 to 1 in.
Pressure and temperature compensation seat design.
Swing-out design for fast and easy maintenance with the valve in-line.
Chevron packing design.
2-way (on-off) valves with quarter-turn actuation.
2-way on-off Valves
3-way on-off Valves
Working Pressure : 10,000 psig
DK-Lok 1/4 to 1 in. OD
Pipe thread 1/4 to 1 in.
Blowout proof design with internally loaded stem.
Handle indicates the flow direction.
Positive stop with a robust stop pin.
Various end ports including DK-Lok tube port.
Various flow control with side and bottom inlet port on 3-way diverter valves
Designed to control fluids in full open or full closed position.
2-way bi-directional Valves
3-way diverter Valves
Working Pressure : 6,000 psig
Stainless Steel
DK-Lok 1/8 to 3/4 in. OD
DK-Lok 3mm to 16mm OD
Pipe thread 1/8 to 1/2 in.
High flow in a compact design.
High pressure capacity designed for blow-out proof with internally loaded ball stem.
Micro-finished ball provides a positive seal.
90 degree actuation for 2-way and 180 degree actuation for 3-way ball valves.
Panel mounting as standard
2-way on-off Valves
3-way on-off Valves
Working Pressure : 6,000 psig for VT86 Series 10,000 psig for VTH86 Series
Stainless Steel
DK-Lok 1/4 to 1/2 in.
The Trunnion ball valve is featured by blowout-proof
design with cylindrical extensions at the top and bottom of the ball.
The trunnion prevents the ball from shifting and permits the ball to rotate on a vertical axis.
Integral ball stem machined from single piece of bar stock eliminates the backlash during handle actuation
Panel mounting nut is standard permitting valve to panel or actuator.
Designed to control fluids in full open or full closed position.
Up to 7,250 psig (500bar)
Up to 100℃ (212℉)
DIN 1,4404, SS316L
DIN O.D 6mm ~ 38mm
Pipe thread 1/8 ~ 1 in.
Ball valve to DIN standard
Positive stop with robust stop pin
Various end ports including DIN Standard port
Hydraulic fluids
Compressed Air
Fuel oil system
Working Pressure : 3,000 psig
Stainless Steel and Brass
DK-Lok 1/8 to 1/2 in. OD
Pipe thread 1/8 to 1/2 in.
Positive shut-off, high flow capacity
Quick quarter-turn operation
Unique forward flow throttling
Low torque operation
Unidirectional flow
Optional downstream vent