Tools | DK-lok Egypt

Hydraulic Swaging unit DHS

Hydraulic Swaging Unit DHS-2A Setup and Operating Instuction.

Brief Description

Pre-Swages Dk-Lok ferrules onto tubing :
Fractional : 1/2″, 5/8″, 3/4″, 1″, 1-1/4″, 1-1/2″, and 2″
Metric : 12, 14, 15, 16, 18, 20, 22, 25, 28, 30, 32, 38 and 50 mm

Assure consistent make-up the with only about 30% of the manual pull-up torque.

Reducers installation time.

Easy to use by one operation

Different size can be pre-swaged just by replacing Die and Jig.

Portable with wheels on sturdy aluminum carrying case.

Electric Swaging Unit DES

Hydraulic Swaging Unit

Spec.

Hydraulic Pump : 0.35~2.01 kW/min

Operation pressure : 0~600 bar

Connection : 220V / 110V / 1 phase 50~60Hz / 2.5A

Dimension : 400 x 400 x 230 mm

Weight : 48kg

Brief Description

Re-swage Dk-Lok ferrules onto tubing:
Fractional: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2”
Metric: 12 mm, 20 mm, 28 mm, 32 mm, 38 mm

Standard 220V & Optional 110V

Assure consistent makeup free from the manual pull-up torque

Reduce installation time

Easy to use by one operation

Different size can be pre-swaged just by replacing Die and Jig

Portable in sturdy plastic case

Preswaging Tool DPS

Hydraulic Swaging Unit

Spec.

Material : SKD-11

Size : 1/8″, 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, and 1″

Size : 3mm, 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 16mm, 18mm,
20mm, 22mm, 25mm and 28mm

Brief Description

Preswages ferrules onto the tube

Enables the installer to work in a more open, safe area

Gap Gauge DIG

Assure the installer or inspector that the fitting has been sufficiently pulled up on initial installation.

Spec.

Material : Stainless Steel 316

Size : 1/4″, 5/16″, 3/8″, 1/2″, 3/4″, and 1″

Size : 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 16mm, 18mm, 20mm,
22mm and 25mm

Brief Description

Assure the installer or inspector that the fitting has been sufficiently pulled up on initial installation.

Useful tool to inspect the DK-Lok initially pulled-up.

Useful tool to inspect the DK-Lok initially pulled-up.

DK-Lok depth marking tools help ensure that tubing is bottomed on the shoulder inside the DK-Lok fitting body.

Spec.

Material : Carbon Steel

Size : 1/8″, 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, and 1″

Size : 6mm, 8mm, 10mm, 12mm, 16mm, and 25mm

Brief Description

DK-Lok depth marking tools help ensure that tubing is bottomed on the shoulder inside the DK-Lok fitting body.

Marking on tubing prior to make-up with DK-Lok